Which Topology Is Best?

Which topology is used in schools?

Ring Network Topology Ring network topologies are most often found on school campuses, though some commercial organizations also use them.

FDDI, SONET, or Token Ring technology are typically used.

Data is transported bit by bit from each node until it reaches its destination..

Which topology is the most expensive?

Star topologyStar topology is the most popular way to connect a computer in a workgroup. It is expensive due to the cost of the hub. Star topology uses a lot of cables, which makes it the most costly network to set up as you also have to trunk to keep the cables out of harm.

Which topology has the highest reliability?

Mesh topologyMesh topology can handle high amounts of traffic, because multiple devices can transmit data simultaneously. A failure of one device does not cause a break in the network or transmission of data.

What does bus topology mean?

Local Area NetworkA bus topology is a topology for a Local Area Network (LAN) in which all the nodes are connected to a single cable. The cable to which the nodes connect is called a “backbone”. … The bus topology is e.g. used by Ethernet networks.

What is advantage and disadvantage of mesh topology?

Advantages and disadvantages of using a mesh topology messages can be received more quickly if the route to the intended recipient is short. messages should always get through as they have many possible routes on which to travel. multiple connections mean (in theory) that no node should be isolated.

Which topology is better star or bus?

Whereas in a star configuration, the hub directly transmits data to the desired peripheral device; hence transmission is quite fast. When there is a need for a wide network, then bus topology is preferred. This is so because it supports the easy addition of various devices in the network.

Which topology is fastest?

But in mesh topology each devices are connected to other devices directly by individual cables without using center hub. Theoretically the fastest topology should be mesh topology. But the best topology is star topology.

What is the cheapest topology?

The star and extended star are the most popular topologies for Ethernet networks. This type network is easy to setup, relatively inexpensive, and provides more redundancy than other topologies, i.e. bus topology. The star topology is configured by connecting all of the nodes on the network to central device.

Which topology is easy to install?

Point-to-point topology is the easiest of all the network topologies. In this method, the network consists of a direct link between two computers.

What are the disadvantages of a mesh network?

Disadvantages of a mesh topologyThe cost to implement is higher than other network topologies, making it a less desirable option.Building and maintaining the topology is difficult and time consuming.The chance of redundant connections is high, which adds to the high costs and potential for reduced efficiency.

Which topology is the best and why?

A Star Network Topology is best suited for smaller networks and works efficiently when there is limited number of nodes. One has to ensure that the hub or the central node is always working and extra security features should be added to the hub because it s the heart of the network.

Why bus topology is best?

Advantages of Bus Topology Bus topologies are a good, cost-effective choice for smaller networks because the layout is simple, allowing all devices to be connected via a single coaxial or RJ45 cable. If needed, more nodes can be easily added to the network by joining additional cables.

What is topology explain?

In networking, topology refers to the layout of a computer network. Topology can be described either physically or logically. Physical topology means the placement of the elements of the network, including the location of the devices or the layout of the cables.

What topology means?

In mathematics, topology (from the Greek words τόπος, ‘place, location’, and λόγος, ‘study’) is concerned with the properties of a geometric object that are preserved under continuous deformations, such as stretching, twisting, crumpling and bending, but not tearing or gluing.

What is topology with example?

There are a number of different types of network topologies, including point-to-point, bus, star, ring, mesh, tree and hybrid. Common examples are star ring networks and star bus networks. Tree topology is one specific example of a star bus network. Consider, for example, a multistory office building.

Which topology has minimal line cost?

ring topologyA ring topology has minimal line cost.

Who uses mesh topology?

Mesh topology is a type of networking where all nodes cooperate to distribute data amongst each other. This topology was originally developed 30+ years ago for military applications, but today, they are typically used for things like home automation, smart HVAC control, and smart buildings.

Why mesh topology is the best?

The primary advantage of mesh topology is that it has low transmit power and shorter links (< 100 ft), which allows for a fairly long battery life and enables you to move a lot of data around the network. The primary disadvantage of mesh topology is that the range between two mesh nodes is quite limited.